|
Wire Sawing able to cut Steel, Concrete, Brick, Granite or Stone in hard to reach areas.
Diamond wire sawing was created by great advances in diamond application technology. The steel braided wire is impregnated with small cutting diamonds similar to blades and bits used for cutting concrete. The wire is oriented in a looped fashion on the cutting plane. A hydraulic driven wheel then forces the wire to pull through the surface to be cut. The use of multiple pulleys allows the wire to cut any thickness at any angle assuming there is access. Steel, concrete, brick, granite and stone are many of the materials that the wire can be constructed for. The ideal applications include structures that are too thick or too large for conventional cutting means, tight areas, and submerged locations. Some examples are foundation concrete walls thicker than 30” requiring openings, piers submerged in lakes or large barrel chillers cut down for removal.
It has been said that the application of this process is only limited by ones imagination. The wire can be sized for any Steel, Concrete, Brick, Granite or Stone project. Planning, engineering, and creativity allow multiple cuts to happen simultaneously which can reduce cutting time. Water is a necessary part of the process that keeps the cutting location cooled and any potential dust minimized. Rebar or other reinforcing is not an issue for the wire to cut although it increases the cutting time minimally.
Please give us a call at 419-841-5656 with any questions you have on wire cutting steel, wire cutting concrete, wire cutting brick, wire cutting granite or wire cutting stone.
|
