Akron (330) 633-5104  |  Cincinnati (513) 723-0099 |  Columbus (614) 252-1122  |  Dayton (937) 746- 8999  |  Toledo (419) 841-1330
Ohio Concrete Sawing and Drilling
Last Updated: October 5, 2017

Concrete Flat Sawing
Specialized Equipment for Cutting and Removing Concrete.

Concrete flat sawing is the most identified diamond cutting method. In some areas of the country, it is also called Slab sawing since horizontal installations of concrete are often referred to as "slabs" of concrete. Flat sawing features a diamond blade that is mounted on a walk behind machine requiring one operator. These horizontal surfaces can be slab on grade floors (concrete installed on a stone base), bridge decks, driveways, structural or elevated slabs, and pavement.

Flat sawing can be performed with an electric or diesel unit. The type of motor becomes an issue with the location of the work. If you work is located outside in a large building with adequate ventilation, our fleet of diesel saws may be the right solution to their better productivity.

When you call, please be prepared to discuss available power options for electric flat sawing. A large portion of our trucks are equipped with generators if your building can not meet the power needs.

If the concrete happens to be in a basement or a confined area, our small electric saw may be the remedy you need to efficiently cut. It is able to be transported up and down stairs with two people. But there are areas where a flat saw will not work.

Generally, cuts can be made up to 24" deep. However, we do offer specialized cuts of up to 27" deep.

We also can saw a variety of materials and metals including zinc, magnesium, and beryllium.

Typical Applications Include:

  • Cutting reinforced concrete floors
  • Cutting expansion and control joints
  • Trenching for utility installation
  • Removing damaged pavement
  • Clean and repair cracks
  • Openings for staircases, elevators, and ductwork

Flat sawing is the most commonly used diamond cutting method. It is typically used to cut horizontal flat surfaces such as floors, bridge decks, and pavement. Also called slab saws, flat saws feature a diamond blade that is mounted on a walk-behind machine requiring only one operator. They can cut up to 24" in depth. Flat saws are typically used to provide expansion joints, remove damaged pavement sections, clean and prepare random cracks for repair, and remove concrete sections for demolition purposes.

 

Electric Flat Sawing Video

Chain Sawing Video

Diesel Slab Sawing Video

 

Follow these links for more
concrete sawing and drilling information:

Concrete Sawing
Concrete Sawing Safety
Core Drilling
Core Drilling Safety
Silicosis Concerns

 


Sawing Drilling & Coring Grinding & Polishing Specialty Services Ohio Concrete
Asphalt Sawing
Flat / Slab Sawing
Wall Sawing
Wire Sawing
Horizontal Curb Cutting
Concrete Coring
Asphalt Coring
Vertical Core Drilling
Horizontal Core Drilling
Manhole Coring
Pipe Boots

Floor Grinding & Shaving
Surface Preparation
Polishing
Scraping / Shaving
Burnishing & Sealing Milling
Joint Repair / Slab Stabilization
Egress Windows & Doors
Bumper Post Installation
Bollard Post Installation
Anchor Drilling & Installation
Safety Grooving
Mini Electric Excavation
Vacuum Excavation
Removal
Demolition
Ground Penetrating Radar
Contact
Employment
FAQ
Newsletters
Used Equipment
Safety Videos