Concrete Sawing Services
Featured Project: Efficient Elevator Motor Removal with Wire Sawing
ThyssenKrupp Elevator was tasked with replacing and upgrading the elevators in Rhodes Tower, Columbus, Ohio. Read more about Ohio Concrete's expertise to bisect the motors efficiently.
Concrete Cutting Services for Commercial Renovation Projects
When renovating active commercial buildings, precision concrete cutting is essential to keep occupants safe and operations running smoothly. Ohio Concrete Sawing & Drilling brings over 40 years of proven expertise and state-of-the-art equipment to every project, ensuring minimal disruption and maximum accuracy in occupied facilities. Our skilled operators utilize robotic demolition systems, electric saws, and water-suppression techniques to drastically reduce vibration, fumes, and dust—protecting both tenants and workers. On a recent hospital renovation, we removed over 1.2 million pounds of concrete using all-electric tools, eliminating carbon monoxide fumes and significantly minimizing noise and vibration compared to traditional jackhammers. Through careful planning and advanced technology, we deliver renovation cuts that keep your project on schedule while occupants remain in place.
Renovation-Focused Concrete Cutting
OCSD's concrete cutting services are specifically tailored for renovation environments. From interior slab modifications to selective removals, we handle it all with minimal impact:
Interior Slab Cutting: We make clean, precise cuts through concrete floors and foundations using flat saws or walk-behind track saws. Ohio Concrete can cut up to 30″ deep into slabs with traditional saws—and even deeper with wire sawing—allowing for flooring changes or utility trenches without full-scale demolition.
Trench Cutting: When new plumbing, electrical, or conduit installations are required, our team saws long, precise trenches through existing slabs, creating clean channels for service lines. This focused approach eliminates unnecessary breaking and accelerates installation timelines.
Selective Demolition: Need to remove just a section of structure? We provide targeted removal, cutting only the concrete designated for replacement. For instance, we recently removed a decorative façade from a storage facility by precisely sawing away its 12″ support beams. By cutting only what was necessary, we preserved the integrity of the remaining structure and significantly reduced disruption.
These specialized cutting methods protect structural integrity while creating the openings or removals your remodel demands. Each technique is executed with water suppression and debris vacuuming whenever possible to maintain a clean, safe environment.
Fig: Selective façade removal at an occupied commercial site, demonstrating precise cutting of concrete beams.
Industries We Support
Our commercial renovation cutting services span diverse industries across Ohio and Michigan. We partner with property managers, retail developers, and facility owners in sectors including:
Industrial & Infrastructure:
Handling projects in factories, airports, and treatment plants. Our teams have executed complex cuts on infrastructure, including runways and wastewater plants, demonstrating our capability in large-scale commercial environments.
Healthcare & Education:
Performing cuts in hospitals, clinics, schools, and campuses with exceptional care. Our crews cut 1.2 million pounds of concrete at a medical center using electric tools—avoiding fumes and noise—to accommodate critical facility upgrades.
Warehouses & Manufacturing:
Cutting concrete floors and walls in industrial facilities while minimizing downtime in production and logistics areas.
Retail & Restaurants:
Renovating storefronts, shopping centers, or dining spaces where work must proceed without closing operations.
From University of Michigan Medical Center renovations to airport and wastewater infrastructure projects, our experience proves we know how to work safely around people and critical equipment. We adapt to each industry's unique requirements, delivering precise sawing in active buildings so business operations can continue uninterrupted.
Dust, Noise & Safety Controls
Safety and cleanliness are paramount when cutting concrete in occupied buildings. OCSD employs multiple controls to protect people and the environment:
Wet Cutting:
We apply water to the blade or bit during sawing and coring operations. This dramatically suppresses silica dust particles—meeting strict OSHA requirements—and prevents dust from becoming airborne.
HEPA Filtration & Vacuum Systems:
In areas where water use is limited (such as below-grade spaces) or for final clean-up, we deploy HEPA-filtered dust collectors and vacuums. These machines capture microscopic particulates that water alone can't control, ensuring clean air during and after cuts.
Electric & Low-Emission Equipment:
Whenever feasible, we use electric-powered saws and drills. On that medical center project, all cutting was performed with electric tools to eliminate carbon monoxide exhaust. Electric equipment also operates more quietly, reducing noise disturbance during renovations.
Silica & Site Safety Protocols:
Our crews complete ongoing OSHA silica training and follow rigorous on-site safety plans. We plan cutting sequences so work can occur during off-hours when needed, and we establish controlled work zones to keep occupants safe. From high-cycle wall saws to robotic cutters, every method is chosen with dust, noise, and vibration reduction as priorities.
Fig:
Concrete core drilling inside an occupied facility. Workers wear full PPE and employ wet processes to capture dust on-site.
Common Concrete Sawing & Cutting Use Cases
Door Opening Concrete Wall Cutting
Door opening concrete wall cutting is required when adding new access points in reinforced concrete or masonry walls during commercial, industrial, or institutional renovations. Ohio Concrete Services performs precision concrete wall sawing for door openings using professional wall saws that produce straight, square edges with minimal vibration. This controlled cutting method is ideal for both load-bearing and non-structural walls, helping protect surrounding concrete and structural elements. Each opening is accurately sized and aligned, leaving a clean cut ready for steel lintels, framing, fire-rated doors, or roll-up door installation without excessive patching or rework
Trenching a Concrete Slab for Plumbing
Trenching a concrete slab for plumbing allows contractors to install or relocate drain lines, water lines, and underground utilities beneath existing floors. Ohio Concrete Services uses concrete slab saw cutting to define clean trench lines before removal, creating straight edges and controlled depths that reduce unnecessary demolition. This approach minimizes disruption, limits dust, and protects the structural base of the slab. Compared to breaking concrete without saw cuts, trench saw cutting speeds up plumbing installation, simplifies inspections, and results in a cleaner, more efficient restoration process.
Saw Cutting for Egress Windows
Saw cutting for egress windows is a common requirement for basement finishing projects and residential code compliance upgrades. Using precision wall saws, Ohio Concrete Services performs concrete cutting for egress windows that meets required opening dimensions while preserving the integrity of foundation walls. Clean, straight cuts reduce the risk of cracking or spalling and create an opening ready for window installation, window wells, and waterproofing systems. This method is especially effective in occupied homes where accuracy, dust control, and structural care are essential.
Core Drilling for Sprinkler / Fire Protection Penetrations
Core drilling for sprinkler and fire protection penetrations provides clean, code-compliant openings for fire suppression piping through concrete walls and floors. Ohio Concrete Services performs concrete core drilling for fire sprinkler systems with exact hole sizing to match pipe and sleeve requirements. This precise drilling method minimizes structural impact, reduces patching, and simplifies firestop installation. Core drilling is commonly used in warehouses, hospitals, manufacturing facilities, and commercial buildings where fire protection systems must meet strict inspection and life-safety standards.
MEP Penetrations (HVAC, Electrical, Plumbing)
MEP penetrations through concrete are essential for routing HVAC ductwork, electrical conduit, and plumbing systems in commercial and industrial buildings. Ohio Concrete Services provides concrete drilling and saw cutting for MEP penetrations, creating accurately sized openings based on mechanical and electrical drawings. Precision penetrations reduce structural concerns, eliminate oversized holes, and allow other trades to work efficiently without delays. These services are ideal for mechanical rooms, commercial build-outs, industrial plants, and renovation projects requiring coordinated HVAC, electrical, and plumbing installations.
Cut Trench Then Pour Back Concrete
Cut trench & pour back concrete services are used when underground plumbing or utility work is completed, and the slab must be fully restored. Ohio Concrete Services saw cuts clean trench lines, allowing controlled removal and a precise concrete trench restoration once work below the slab is finished. Concrete is poured back flush with the surrounding floor, creating a durable, safe surface that reduces trip hazards and maintains structural integrity. This approach is especially valuable in commercial and industrial facilities where fast turnaround and long-term floor performance matter.
One Contractor, Multiple Services
As Ohio's premier concrete cutting contractor, we offer a comprehensive suite of services to handle any renovation project. You can rely on one experienced team for everything from sawing to removal:
Selective Concrete Removal:
For demolitions requiring precision control, we offer concrete breaking and removal services. From sawing out curb lines to removing slab sections, our crews break and haul concrete efficiently. We've moved massive quantities of concrete using specialized excavators and saws, minimizing debris and eliminating unnecessary vibration.
Core Drilling:
We perform vertical and horizontal coring for plumbing, conduits, ducts, and anchors. Our rigs can wet-drill holes up to 60″ in diameter through concrete or masonry, producing smooth, precise openings for everything from HVAC to fiber runs.
Wall & Wire Sawing:
Track-mounted wall saws and diamond wire saws cut through thick walls and columns with ease. These tools allow us to create openings or shorten structural elements without impacting surrounding structures.
Flat/Slab & Asphalt Sawing:
Our walk-behind and ride-on saws deliver clean cuts in floors, roads, and slabs—ideal for adding doorways or new utility trenches in parking areas and warehouse floors.
With OCSD, you get one-stop capability. We have the equipment and expertise to execute complex projects correctly the first time. Whether your job calls for precise sawing, drilling, grinding, or robotic demolition, we manage it all under one roof.
Schedule a Renovation Cutting Consultation
Don't wait until your renovation is underway to address concrete cutting. Early planning is crucial. Contact Ohio Concrete Sawing & Drilling during pre-construction to gain expert input on cut locations, schedules, and permits. Our estimating team is highly responsive—most requests can be scheduled within 72 hours—so you'll have a clear plan and cost estimate well before the first blade starts. Reach out for a no-obligation consultation and let us help you integrate fast, safe concrete cutting into your next commercial remodel.